Model # 7200RB001|Store SKU # 1000478058
AcrylPro Professional Ceramic Tile Adhesive is a professional formula adhesive with high bond strengths. Ideal for small format ceramic, mosaic, porcelain and most gauged stone tile on walls or floors, AcrylPro may be used in areas with intermittent water exposure such as tub surrounds and shower walls. Recommended for tile up to 8 in. (20 cm) on any side. Can be used with tile up to 15 in. (38 cm) on any side but dry time significantly increases. For tile with any side greater than 15 in. (38.1 cm), Custom recommends using a polymer modified cement mortar specifically designed for setting large format tile.
The Henry 336 Bond Enhancer 1 qt. Floor Primer helps improve adhesion on dry, dusty and porous substrates. The primer can be used on pour in place gypsum cement underlayment's and to prime soft wood floors including plywood. User friendly with improved handling characteristics.
ROBERTS 2057 VCT-EZ® Adhesive is a SBR latex adhesive that provides excellent grab and high residual tack. This superior grade adhesive brushes, rolls or trowels on and helps hold the tile firmly in place, even when subjected to repeated cleaning and mopping. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. When spread thinly as instructed, the adhesive dries correctly and turns clear, allowing chalk lines to remain visible. This adhesive is also suitable for installing vinyl-composition or vinyl-asphalt tile over existing vinyl-composition or vinyl-asphalt subfloors that are free from waxes, sealers and finishes. For interior use only, not recommended for installation of luxury vinyl tile (LVT), luxury vinyl plank (LVP) or solid vinyl-backed products.
ROBERTS 6399 Firm Set Transitional Pressure Sensitive Adhesive is formulated for installation of resilient flooring including Luxury Vinyl Tile (LVT), Luxury Vinyl Plank (LVP), and Vinyl Composition Tile (VCT), as well as Carpet Tile. This is a very aggressive, high-tack transitional adhesive with superior shear strength and high resistance to lateral forces, making it ideal for heavy traffic, with great performance under rolling loads. ROBERTS 6399 installs like a pressure-sensitive adhesive, and firms as it cures to form a permanent bond. Used as a pressure-sensitive adhesive, it has a 60 minute open time and a 12-hour working time; For semi-wet installation, it has a 20 minute open time and a 40 minute working time. Easy to clean it dries clear, has high resistance to moisture with low odor and VOC (<1g/L). Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. It is CRI Certified.
ROBERTS 7200HP High-Performance Base Bond Adhesive is specially formulated for interior installation of vinyl, rubber and carpet wall base. This is a superior-grade, solvent-free adhesive with a tenacious wet-suction capabilities making it ideal for use over porous wall surfaces such as gypsum drywall, brick, concrete block, wood, properly cured plaster and concrete. It offers quick grab and rapid setup for fast, easy installation. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. VOC < 1 g/L.
