Model # 7200RBHP313|Store SKU # 1000103244
AcrylPro Professional Ceramic Tile Adhesive is a professional formula adhesive with high bond strengths. Ideal for small format ceramic, mosaic, porcelain and most gauged stone tile on walls or floors, AcrylPro may be used in areas with intermittent water exposure such as tub surrounds and shower walls. Recommended for tile up to 8" (20 cm) on any side. Can be used with tile up to 15" (38 cm) on any side but dry time significantly increases. For tile with any side greater than 15" (38.1 cm), CUSTOM recommends using a polymer modified cement mortar specifically designed for setting large format tile.
Tackett QBond-One is a solvent-free acrylic latex based flooring adhesive. Maybe used for releasable applications of Tackett FiberFloor in residential areas only. May also be used for permanent applications of Tackett FiberFloor, Resilient (felt-backed) and Luxury Vinyl Plank and Tile flooring.
ROBERTS 7350 is a high-quality, high-solids formulation for installation of resilient flooring and vinyl-backed carpet tile. This acrylic latex, pressure-sensitive adhesive has tremendous bond and shear strength, making it ideal for use with large format vinyl tiles. It has excellent moisture and plasticizer migration resistance for demanding commercial installations. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. ROBERTS 7350 can be used to adhere specialty vinyl flooring underlayment, plus homogeneous and heterogeneous sheet flooring. For interior use only, dry time may vary with temperature, humidity and porosity of substrate. VOC<11 g/L.
ROBERTS 2057 VCT-EZ® Adhesive is a SBR latex adhesive that provides excellent grab and high residual tack. This superior grade adhesive brushes, rolls or trowels on and helps hold the tile firmly in place, even when subjected to repeated cleaning and mopping. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. When spread thinly as instructed, the adhesive dries correctly and turns clear, allowing chalk lines to remain visible. This adhesive is also suitable for installing vinyl-composition or vinyl-asphalt tile over existing vinyl-composition or vinyl-asphalt subfloors that are free from waxes, sealers and finishes. For interior use only, not recommended for installation of luxury vinyl tile (LVT), luxury vinyl plank (LVP) or solid vinyl-backed products.
ROBERTS 7200HP High-Performance Base Bond® is a superior-grade, solvent-free adhesive specifically formulated for the interior installation of vinyl, rubber and carpet wall base. The tenacious wet-suction capabilities this adhesive offers make it ideal for use over porous wall surfaces such as gypsum drywall, brick, concrete block, wood, properly cured plaster and concrete. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. VOC < 1 g/L.
