Appliances Bath BBQs & Outdoor Cooking Blinds & Window Coverings Building Materials Cleaning Décor & Furniture Doors & Windows Electrical Heating & Cooling Floors & Area Rugs Hardware Kitchen Lawn & Garden Centre Lighting & Ceiling Fans Lumber & Composites Outdoor Living & Patio Outdoor Power Equipment Paint Plumbing Sheds & Outdoor Structures Storage & Organization Smart Home Tools All Departments Pro Savings Event Halloween New Arrivals Refresh for Less
Don’t miss out on our Pro Savings Event. Ends October 7.  Shop Now

Hillman 1/2-inch x 3-3/4-inch Power-Stud+ SD1 Anchor in Zinc - 12 Pack

Model # 370988|Store SKU # 1001160872

Hillman 1/2-inch x 3-3/4-inch Power-Stud+ SD1 Anchor in Zinc - 12 Pack

Overview

Model # 370988 Store SKU # 1001160872

The Power-Stud+ SD1 is a fully threaded, torque controlled, wedge expansion anchor that is designed for concrete applications. Suitable base materials are normal-weight and sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. This anchor has various DOT approvals including Caltrans listing for "Stud Mechanical Expansion Anchors". Building code approved.

  1. Zinc-plated wedge anchors designed for consistent performance in cracked and un-cracked concrete
  1. Suitable base materials are normal-weight, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry
  1. Common applications include structural connections such as beam and column anchorage
  1. Nominal drill bit size is the same as the anchor diameter
  1. Anchor can be installed through standard fixture holes
  1. Includes nut and washer

Manual

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Related Searches
1/4 inch x 2 inch anchor
1/4 inch x 1-1/2 inch anchor
hillman anchor
1/2 inch x 4-1/2 inch anchor
3/8 inch x 3-3/4 inch anchor
hillman zinc anchor
5/8 inch x 8-1/2 inch anchor
zinc anchor

Related Products

Red Head 1/2-inch x 4-inch Steel Hex Head Sleeve Anchor with Zinc Plated Finish - 1 Pack

Red Head Sleeve Anchors are designed for fastening into porous concrete, hollow or grout-filled block and brick. Use to install machinery and supports, window frames, partitions, cabinets and pipe supports. Red Head Sleeve Anchors are contractor grade and building code approved.

Red Head Sleeve Anchors are designed for fastening into porous concrete, hollow or grout-filled block and brick. Use to install machinery and supports, window frames, partitions, cabinets and pipe supports. Red Head Sleeve Anchors are contractor grade and building code approved.
View Details

Paulin 1/4 x 1-1/2-inch Nail-In Anchors, Zinc - 100pcs

Paulin's Nail-In Anchors are two-part mechanical anchors for fastening into solid concrete, brick, cement block, or stone. Anchor hold is created by driving the nail into the anchor body, then each half of the expansion mechanism is compressed against the walls of the drilled hole. Zinc alloy coating provides moderate corrosion resistance.

Paulin's Nail-In Anchors are two-part mechanical anchors for fastening into solid concrete, brick, cement block, or stone. Anchor hold is created by driving the nail into the anchor body, then each half of the expansion mechanism is compressed against the walls of the drilled hole. Zinc alloy coating provides moderate corrosion resistance.
View Details

Hilti 1/2 inch x 4 inch HLC Hex Nut Sleeve Anchors (25-Pack)

Hilti's line of HLC Sleeve Anchors provide high performance load values in block, masonry, and concrete base materials. These sleeve Anchors are suitable for medium-duty fastening jobs, and the variety of head styles, lengths, and diameters allow you versatility for completing many different types of projects. The pre-assembled stud-type Anchors design makes your fastening project easier and quicker, as you can accomplish through-type fastenings even in bottomless holes. HLC Sleeve Anchors also feature a bulged middle section of the sleeve with triangular diamond shaped openings that help prevent the Anchors from twisting in its hole or dropping out of an overhead hole. Get the Anchors with more versatility and higher holding values: the Hilti HLC Sleeve Anchor.

Hilti's line of HLC Sleeve Anchors provide high performance load values in block, masonry, and concrete base materials. These sleeve Anchors are suitable for medium-duty fastening jobs, and the variety of head styles, lengths, and diameters allow you versatility for completing many different types of projects. The pre-assembled stud-type Anchors design makes your fastening project easier and quicker, as you can accomplish through-type fastenings even in bottomless holes. HLC Sleeve Anchors also feature a bulged middle section of the sleeve with triangular diamond shaped openings that help prevent the Anchors from twisting in its hole or dropping out of an overhead hole. Get the Anchors with more versatility and higher holding values: the Hilti HLC Sleeve Anchor.
View Details
1/2-inch x 3-3/4-inch Power-Stud+ SD1 Anchor in Zinc - 12 PackHillman 1/2-inch x 3-3/4-inch Power-Stud+ SD1 Anchor in Zinc - 12 PackThe Power-Stud+ SD1 is a fully threaded, torque controlled, wedge expansion anchor that is designed for concrete applications. Suitable base materials are normal-weight and sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. This anchor has various DOT approvals including Caltrans listing for "Stud Mechanical Expansion Anchors". Building code approved.
Hillman
1001160872
CAD47.682026-09-29
The Home Depot Canada
3.545511