Appliances Bath BBQs & Outdoor Cooking Blinds & Window Coverings Building Materials Cleaning Décor & Furniture Doors & Windows Electrical Heating & Cooling Floors & Area Rugs Hardware Kitchen Lawn & Garden Centre Lighting & Ceiling Fans Lumber & Composites Outdoor Living & Patio Outdoor Power Equipment Paint Plumbing Sheds & Outdoor Structures Storage & Organization Smart Home Tools All Departments Pro Savings Event Halloween New Arrivals Refresh for Less
Don’t miss out on our Pro Savings Event. Ends October 7.  Shop Now

IPEX 3 inch x 3 inch x 3 inch PVC Sewer Straight Tee - H

Model # 240102|Store SKU # 1001215724

IPEX 3 inch x 3 inch x 3 inch PVC Sewer Straight Tee - H

Overview

Model # 240102 Store SKU # 1001215724

IPEX PVC-BDS pipe and fittings for Building-Drain-Sewer Applications.This sharp 90-degree tee is also known as a vent tee and is designed to be part of the PVC drain venting system. Do not install as part of the drainage system. PVC fittings are durable and long lasting.

  1. Used in gravity-fed non-pressure sewer and landscape drainage installations
  1. Not intended for use in pressure systems
  1. Maximum working temperature of 60°C (140°F)
  1. Meets CSA B182.1 Standard and B182.2
  1. Easily joined to PVC pipe using solvent cement

Manual

  1. PVC Sewer install guide-pdf.pdf
  2. PVC Sewer Manual-pdf.pdf
  3. PVC Chemical resistance Guide-pdf.pdf
  4. Guide installation egouts PVC-pdf.pdf
  5. Manuel egouts PVC-pdf.pdf
  6. PVC Guide de resistance chimique-pdf.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Related Searches
pvc fittings
plumb eeze pvc female combination tee
pvc pipes fittings
ipex homerite radonx pipes and fittings
pro connect pvc female combination tee

Related Products

IPEX System 636 Flue Gas Vent 2 inch x 2 inch x 1/2 inch PVC Access Tee - HxHxFPT

Only IPEX offers System 636 Flue Gas Venting, a complete system of pipe fittings, termination kits and cements engineered and manufactured to strict quality, performance and dimensional standards.

Only IPEX offers System 636 Flue Gas Venting, a complete system of pipe fittings, termination kits and cements engineered and manufactured to strict quality, performance and dimensional standards.
View Details

IPEX System 636 Flue Gas Vent 3 inch x 1 1/2 inch PVC Tee - H

Part of the plastic pipe, fittings, and cement system certified to ULC S636 for venting high efficiency gas appliances. Fully certified as a complete pipe, fittings, and cement system. Ease of identification with fitting labels and pipe print lines

Part of the plastic pipe, fittings, and cement system certified to ULC S636 for venting high efficiency gas appliances. Fully certified as a complete pipe, fittings, and cement system. Ease of identification with fitting labels and pipe print lines
View Details

Pro-Connect FLEXIBLE TEE 11/2

The PRO-CONNECT 1-1/2" flexible tee connects all common household drain, waste & vent pipe quickly. It is flexible, extra long and ideal for replacing fittings cut out and joints during alteration or repair.

The PRO-CONNECT 1-1/2" flexible tee connects all common household drain, waste & vent pipe quickly. It is flexible, extra long and ideal for replacing fittings cut out and joints during alteration or repair.
View Details

Pro-Connect Pvc Female Combination Tee - 3/4 Inch (Ins X Ins X Fpt)

Joins two 3/4 Inch Pieces of Poly Pipe to 3/4 Inch Male Threaded Pipe to form a tee. NSF Approved. Safe for Potable Water. Good Chemical Resistance. Not affected by Ultraviolet Light. Widely used in irrigation systems where lines are not below the frost line. Temperature Rating 73 F - Cold Water Applications.

Joins two 3/4 Inch Pieces of Poly Pipe to 3/4 Inch Male Threaded Pipe to form a tee. NSF Approved. Safe for Potable Water. Good Chemical Resistance. Not affected by Ultraviolet Light. Widely used in irrigation systems where lines are not below the frost line. Temperature Rating 73 F - Cold Water Applications.
View Details
3 inch x 3 inch x 3 inch PVC Sewer Straight Tee - HIPEX 3 inch x 3 inch x 3 inch PVC Sewer Straight Tee - HIPEX PVC-BDS pipe and fittings for Building-Drain-Sewer Applications.This sharp 90-degree tee is also known as a vent tee and is designed to be part of the PVC drain venting system. Do not install as part of the drainage system. PVC fittings are durable and long lasting.
IPEX
1001215724
53