Appliances Bath BBQs & Outdoor Cooking Blinds & Window Coverings Building Materials Cleaning Décor & Furniture Doors & Windows Electrical Heating & Cooling Floors & Area Rugs Hardware Kitchen Lawn & Garden Centre Lighting & Ceiling Fans Lumber & Composites Outdoor Living & Patio Outdoor Power Equipment Paint Plumbing Sheds & Outdoor Structures Storage & Organization Smart Home Tools All Departments Pro Savings Event Halloween New Arrivals Refresh for Less
Don’t miss out on our Pro Savings Event. Ends October 7.  Shop Now

RAIN BIRD 9-Port Drip Manifold

Model # A50881|Store SKU # 1001493361

RAIN BIRD 9-Port Drip Manifold

Overview

Model # A50881 Store SKU # 1001493361

Providing full adjustability of each port, this drip irrigation manifold will allow you to customize flow from 0 to 20 GPH for individual plants, improving root development and reducing plant stress. The manifold has 9 ports which accept standard ¼ in. drip tubing. Each port adjusts with a side lever to increase, decrease or shut off flow. The manifold mounts to a standard ½ MPT riser.

  1. 9-ports with individual levers for on, off or regulated flow
  1. Use with ¼" drip irrigation tubing
  1. 0-20 GPH per port
  1. Operating pressure: 25 psi

Manual

  1. Rain Bird - Installation Guide-pdf.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Related Searches
orbit inline manifold
orbit dripmaster apollo 8 manifold cd
inline manifold
rain bird compression end plug
orbit dripmaster quad adjustable manifold cd
rain bird 6 port drip manifold

Related Products

RAIN BIRD 1/2" Barbed On/Off Valve

Easily adjust or shut off flow in 1/2 in. or 5/8 in. drip tubing runs to different sections of your plant watering area. Avoid over- or under-watering of plants with different moisture needs in the zone. Top cap turns to adjust flow. Barbed ends permit easy, leak-free insertion into drip tubing.

Easily adjust or shut off flow in 1/2 in. or 5/8 in. drip tubing runs to different sections of your plant watering area. Avoid over- or under-watering of plants with different moisture needs in the zone. Top cap turns to adjust flow. Barbed ends permit easy, leak-free insertion into drip tubing.
View Details

RAIN BIRD 1/4" x 100' Drip Tubing

1/4 in. O.D. exterior grade tubing for use in positioning spot watering emitters and other drip irrigation devices around plants. Connect with Rain Bird 1/4 in. barbed fittings and stakes. 100 foot coil that can be cut to needed lengths to water plants.

1/4 in. O.D. exterior grade tubing for use in positioning spot watering emitters and other drip irrigation devices around plants. Connect with Rain Bird 1/4 in. barbed fittings and stakes. 100 foot coil that can be cut to needed lengths to water plants.
View Details

Orbit 2-Port Full-Flow Inline Drip-Lock Manifold

Introducing the easiest to use microirrigation manifold on the market. The manifold system is expandable to any length using the two port manifold extension. DripLock is compatible with tubing from 16mm (0.630 inches) to 18mm (0.710 inches). The fittings are easy to remove and reuse and can rotate making it easy to position where needed. DripLock is up to 60% faster to install or replace than traditional microirrigation fittings.

Introducing the easiest to use microirrigation manifold on the market. The manifold system is expandable to any length using the two port manifold extension. DripLock is compatible with tubing from 16mm (0.630 inches) to 18mm (0.710 inches). The fittings are easy to remove and reuse and can rotate making it easy to position where needed. DripLock is up to 60% faster to install or replace than traditional microirrigation fittings.
View Details

Orbit DripMaster 1/2-inch MPT Bi-Manifold II; Cd

Four 1/4" barbed ports with threads (caps included) Flow control for all two ports Internal Pressure Reduction - Ideal for retro-fitting underground irrigations system

Four 1/4" barbed ports with threads (caps included) Flow control for all two ports Internal Pressure Reduction - Ideal for retro-fitting underground irrigations system
View Details
9-Port Drip ManifoldRAIN BIRD 9-Port Drip ManifoldProviding full adjustability of each port, this drip irrigation manifold will allow you to customize flow from 0 to 20 GPH for individual plants, improving root development and reducing plant stress. The manifold has 9 ports which accept standard ¼ in. drip tubing. Each port adjusts with a side lever to increase, decrease or shut off flow. The manifold mounts to a standard ½ MPT riser.
RAIN BIRD
1001493361
3.973111