MAKITA 18V LXT 15/16" SDS-PLUS Cordless Rotary Hammer, 3-Mode with Torque Limiter, LED Light, Tool Only

Variable Speed, Reversible. Lightweight, 3 Mode Rotary Hammer. SDS-PLUS Shank. Hammer & Rotation / Hammer Only / Rotation Only. Torque limiter stops bit rotation if bit jams for increased operator safety and enhanced tool protection. Rubber joint construction suppresses transmission of vibration to battery, minimizing battery failures due to terminal breakage or poor electrical contact. 40 angle bit positions enable chisels to be positioned at optimum angle of operation.

MAKITA 18V LXT Li-Ion 7/8-inch Cordless SDS-PLUS Rotary Hammer with Variable Speed (Tool Only)

The Makita 18V LXT Lithium-Ion Cordless 7/8" SDS-Plus Rotary Hammer (model DHR241Z, tool only) delivers faster, more efficient percussive drilling to the jobsite. The versatile DHR241Z has 3-mode operation and a built-in torque limiter to ensure stable torque control for a range of concrete drilling tasks, with a more compact design and less vibration. The DHR241Z features a Makita-built high torque motor that delivers 0-1,200 RPM, 0-4,000 blows per minute (BPM), and 1.4 ft.lbs. of impact energy for a wide range of concrete drilling applications. The 3-mode switch allows for hammering, rotation, or hammering with rotation. It also delivers two-times faster drilling with synchronized RPM and BPM for more efficient drilling. The built-in torque limiter clutch disengages if the bit jams, and ensures more stable torque control.

Milwaukee Tool M18 FUEL Overhead Rotary Hammer Kit with Integrated Dust Extraction

The M18 FUEL Overhead Rotary Hammer w/ Integrated Dust Extraction is a new-to-world solution optimized for ceiling drilling. This 2-in-1 design delivers improved ergonomics for overhead work compared to traditional rotary hammer and dust extractor attachments, while maintaining Table 1 compliance. This SDS Plus rotary hammer provides several new features that keep operators productive and comfortable for repetitive drilling overhead. The built-in dust extractor creates a compact, lightweight tool with optimized balance for less fatigue. The newly designed side handle, now located near the rear handle, allows the operator to maintain better body posture throughout the application. The handle can be inserted on the left or right of the tool and can be collapsed for easy storage. AUTOSTOP Kickback protection offers enhanced safety for the operator by preventing over-rotation in a bind-up.

MAKITA 40Vmax XGT Brushless Cordless 1-1/8-Inch Rotary Hammer Kit with 4.0Ah Battery, Rapid Charger & Case

The 40V max XGT Brushless Cordless 1-1/8-Inch Rotary Hammer Kit (HR007GM101) is a cordless concrete solution engineered for heavy-load applications. It delivers the power, speed, and run-time for corded demands, and features a convenient D-handle design that is ideal for overhead, downward or hard-to-reach horizontal drilling/chipping applications. The Makita-built brushless motor delivers a full 2.7 ft. lbs. of impact energy, with 0-980 RPM and 0-5,000 BPM. Constant speed control automatically applies additional power under load for optimum performance. It's equipped with Active Feedback-Sensing Technology (AFT), which electronically turns off the motor if rotation of bit is suddenly forced to stop, and Anti-Vibration Technology (AVT) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration