Showing 2 of 2 products
Get it done with the Weld-Pak 180HD for farm, light fabrication, auto or home projects! If you have access to industrial 208/230 volt input power, you can weld on thicker material up to 3/16 with MIG welding and 1/2 with gas-less flux-cored welding.
Ideal for do-it-yourself(DIY), farm/ranch, automotive, maintenance/repair, HVAC, plumbing, on-site applications and contractor work. Duty cycle: 40% @ 40 amp, 60% @ 36 amp, 100% @ 30 amp, ambient temperature 40°C; Maximum amperage output: 40 amp; Circuit breaker requirement: 50 amp 220V recommended; Generator requirement: 5000W non-inverter type generator recommended; Open circuit voltage: 450V; Optimized cutting: 3/8-inch @ 10-inch per minute for mild steel; Recommended cutting: 1/2-inch @ 7-inch per minute for mild steel; Severance cutting: 5/8-inch @ 4-inch per minute for mild steel; Compressed air: 43.5 psi (0.3 mpa) @ 3.5 cfm; Includes: SG55 plasma cutting torch with 16 ft. lead, 10 ft. ground clamp, 5 ft. power cord with CSA approved NEMA 6-50P 220V "welder" plug. requires air compressor (not included). Recommend to use KICKINGHORSE consumable kit part numbers 07Y2517009. The KICKINGHORSE P40 is an excellent choice for small businesses and hobbyist buyers!