Appliances Bath BBQs & Outdoor Cooking Blinds & Window Coverings Building Materials Cleaning Décor & Furniture Doors & Windows Electrical Heating & Cooling Floors & Area Rugs Hardware Kitchen Lawn & Garden Centre Lighting & Ceiling Fans Lumber & Composites Outdoor Living & Patio Outdoor Power Equipment Paint Plumbing Sheds & Outdoor Structures Storage & Organization Smart Home Tools All Departments Pro Savings Event Halloween New Arrivals Refresh for Less
Don’t miss out on our Pro Savings Event. Ends October 7.  Shop Now

Pro-Connect Pvc Female Combination Tee - 3/4 Inch (Ins X Ins X Fpt)

Model # INS-1402-007|Store SKU # 1000123341

Pro-Connect Pvc Female Combination Tee - 3/4 Inch (Ins X Ins X Fpt)

Overview

Model # INS-1402-007 Store SKU # 1000123341

Joins two 3/4 Inch Pieces of Poly Pipe to 3/4 Inch Male Threaded Pipe to form a tee. NSF Approved. Safe for Potable Water. Good Chemical Resistance. Not affected by Ultraviolet Light. Widely used in irrigation systems where lines are not below the frost line. Temperature Rating 73 F - Cold Water Applications.

  1. Joins two pieces of Poly Pipe to Male Threaded Pipe to form tee.
  1. Quick and easy connections requiring no special tools

Manual

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Related Searches
sharkbite reducing tee
pvc fittings
ipex homerite radonx pipes and fittings
pvc pipes fittings
reln 4 inch tee

Related Products

SharkBite 1/4 inch (3/8 inch OD) Brass Push-to-Connect Tee

The 1/4 in. (3/8 in. O.D.) Shark Bite Push-to-Connect Tee is the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Shark Bite Fittings are certified for potable water supply and hydronic heating applications. Get Shark Bite and get a grip on your next plumbing project.

The 1/4 in. (3/8 in. O.D.) Shark Bite Push-to-Connect Tee is the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Shark Bite Fittings are certified for potable water supply and hydronic heating applications. Get Shark Bite and get a grip on your next plumbing project.
View Details

IPEX Central Vac 2 inch 45 degree PVC Tee Wye

This 3-way connector joins a branch line into the main line of a central vacuum pipe run at a 45º angle.

This 3-way connector joins a branch line into the main line of a central vacuum pipe run at a 45º angle.
View Details

SharkBite Reducing Tee - 3/4 In. x 1/2 In. x 1/2 In.

The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, deburr, mark the pipe approximately 1 (for proper insertion depth), install pipe to proper depth and youre done.

The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, deburr, mark the pipe approximately 1 (for proper insertion depth), install pipe to proper depth and youre done.
View Details

APOLLO 3/4-inch x 3/4-inch x 3/4-inch Plastic PEX-B Barb Tee (20-Pack)

The ApolloPEX 3/4 in. Plastic PEX Barb Tee (20-Pack) is simple to install. ApolloPEX poly alloy fittings are the perfect alternative to brass in regions where water quality can negative affect brass. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX poly alloy tees can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

The ApolloPEX 3/4 in. Plastic PEX Barb Tee (20-Pack) is simple to install. ApolloPEX poly alloy fittings are the perfect alternative to brass in regions where water quality can negative affect brass. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX poly alloy tees can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
View Details
Pvc Female Combination Tee - 3/4 Inch (Ins X Ins X Fpt)Pro-Connect Pvc Female Combination Tee - 3/4 Inch (Ins X Ins X Fpt)Joins two 3/4 Inch Pieces of Poly Pipe to 3/4 Inch Male Threaded Pipe to form a tee. NSF Approved. Safe for Potable Water. Good Chemical Resistance. Not affected by Ultraviolet Light. Widely used in irrigation systems where lines are not below the frost line. Temperature Rating 73 F - Cold Water Applications.
Pro-Connect
1000123341
00