Appliances Bath BBQs & Outdoor Cooking Blinds & Window Coverings Building Materials Cleaning Décor & Furniture Doors & Windows Electrical Heating & Cooling Floors & Area Rugs Hardware Kitchen Lawn & Garden Centre Lighting & Ceiling Fans Lumber & Composites Outdoor Living & Patio Outdoor Power Equipment Paint Plumbing Sheds & Outdoor Structures Storage & Organization Smart Home Tools All Departments Pro Savings Event Halloween New Arrivals Refresh for Less
Don’t miss out on our Pro Savings Event. Ends October 7.  Shop Now

ROBERTS 2057 946 mL Vinyl Composition Tile Flooring Adhesive

Model # 2057RB001|Store SKU # 1000125506

ROBERTS 2057 946 mL Vinyl Composition Tile Flooring Adhesive

Overview

Model # 2057RB001 Store SKU # 1000125506

ROBERTS 2057 VCT-EZ® Adhesive is a SBR latex adhesive that provides excellent grab and high residual tack. This superior grade adhesive brushes, rolls or trowels on and helps hold the tile firmly in place, even when subjected to repeated cleaning and mopping. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. When spread thinly as instructed, the adhesive dries correctly and turns clear, allowing chalk lines to remain visible. This adhesive is also suitable for installing vinyl-composition or vinyl-asphalt tile over existing vinyl-composition or vinyl-asphalt subfloors that are free from waxes, sealers and finishes. For interior use only, not recommended for installation of luxury vinyl tile (LVT), luxury vinyl plank (LVP) or solid vinyl-backed products.

  1. Ideal for installation of vinyl composition tile (excluding self-stick), including tile-over-tile installation
  1. SBR latex, solvent-free adhesive for high initial strength and an improved environmental footprint
  1. For direct bond and double bond installation, bonds with concrete, APA rated plywood, one layer of existing and finish free VCT, aged cutback adhesive residue, primed gypcrete (refer to ASTM F2419) and terrazzo
  1. Covers up to 240 sq. ft. per gallon depending on trowel type, substrate, and installation conditions
  1. Powered by Microban, antimicrobial product protection that helps fight the growth of stain and odor-causing bacteria that can cause product degradation.
  1. Made in Canada for indoor residential and moderate commercial use
  1. Made In Canada with domestic and imported parts

Manual

  1. 2057RB001_Product_Data_Sheet-pdf.pdf
  2. 2057RB001_Safety_Data_Sheet-pdf.pdf
  3. 2057RB001_Product_Brochure-pdf.pdf
  4. 2057RB001_Warranty_Certification-pdf.pdf
  5. 2057RB001_Product_Data_Sheet_FR-pdf.pdf
  6. 2057RB001_Safety_Data_Sheet_FR-pdf.pdf
  7. 2057RB001_Product_Brochure_FR-pdf.pdf
  8. 2057RB001_Warranty_Certification_FR-pdf.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Related Searches
ceramic tile adhesive
473 ml flooring adhesive
floor adhesive
roberts 946 ml wall adhesive
roberts emulsion
roberts adhesive felt sheet
roberts flooring adhesive

Related Products

Custom Building Products AcrylPro 1 Gal. Ceramic Tile Adhesive

AcrylPro Professional Ceramic Tile Adhesive is a professional formula adhesive with high bond strengths. Ideal for small format ceramic, mosaic, porcelain and most gauged stone tile on walls or floors, AcrylPro may be used in areas with intermittent water exposure such as tub surrounds and shower walls. Recommended for tile up to 8" (20 cm) on any side. Can be used with tile up to 15" (38 cm) on any side but dry time significantly increases. For tile with any side greater than 15" (38.1 cm), CUSTOM recommends using a polymer modified cement mortar specifically designed for setting large format tile.

AcrylPro Professional Ceramic Tile Adhesive is a professional formula adhesive with high bond strengths. Ideal for small format ceramic, mosaic, porcelain and most gauged stone tile on walls or floors, AcrylPro may be used in areas with intermittent water exposure such as tub surrounds and shower walls. Recommended for tile up to 8" (20 cm) on any side. Can be used with tile up to 15" (38 cm) on any side but dry time significantly increases. For tile with any side greater than 15" (38.1 cm), CUSTOM recommends using a polymer modified cement mortar specifically designed for setting large format tile.
View Details

ROBERTS Premium GT Heat Bond Tape

An extra thick layer of premium adhesive gives this tape the stronger, quicker grab needed to seam deep-ribbed and coarse-backed carpets. It is designed for all types of commercial installations. It is low smoke and odourless and uses an environmentally safe hot melt adhesive.

An extra thick layer of premium adhesive gives this tape the stronger, quicker grab needed to seam deep-ribbed and coarse-backed carpets. It is designed for all types of commercial installations. It is low smoke and odourless and uses an environmentally safe hot melt adhesive.
View Details

ROBERTS 7200 High-Performance BASE BOND Wall Base Adhesive - 946 mL (1 Qt.)

ROBERTS 7200HP High-Performance Base Bond Adhesive is specially formulated for interior installation of vinyl, rubber and carpet wall base. This is a superior-grade, solvent-free adhesive with a tenacious wet-suction capabilities making it ideal for use over porous wall surfaces such as gypsum drywall, brick, concrete block, wood, properly cured plaster and concrete. It offers quick grab and rapid setup for fast, easy installation. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. VOC < 1 g/L.

ROBERTS 7200HP High-Performance Base Bond Adhesive is specially formulated for interior installation of vinyl, rubber and carpet wall base. This is a superior-grade, solvent-free adhesive with a tenacious wet-suction capabilities making it ideal for use over porous wall surfaces such as gypsum drywall, brick, concrete block, wood, properly cured plaster and concrete. It offers quick grab and rapid setup for fast, easy installation. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. VOC < 1 g/L.
View Details

Custom Building Products Omnigrip Maximum Strength Adhesive .95L

OmniGrip's unique formula sets a radical new standard, offering many benefits not found in traditional tile adhesives. Formulated with more solids and less water, OmniGrip shrinks up to 33% less than traditional adhesives ensuring maximum coverage and superior bonds. This high-polymer formula remains flexible allowing a wide variety of applications. Excellent for both floor and wall applications. Sets ceramic floor tile up to 16" x 16" (40.6 cm x 40.6 cm) and stone tile on floors up to 12" x 12" (30 cm x 30 cm). It can also be used in exterior wall applications in covered areas. Weighing 25% less than traditional adhesives, OmniGrip applies effortlessly and is easier to carry. Open and adjustment times are in excess of 60 minutes. Offers maximum resistance to prolonged water exposure as defined by ANSI A136.1, Type 1. Protected by MoldGard Technology to resist mould and mildew growth.

OmniGrip's unique formula sets a radical new standard, offering many benefits not found in traditional tile adhesives. Formulated with more solids and less water, OmniGrip shrinks up to 33% less than traditional adhesives ensuring maximum coverage and superior bonds. This high-polymer formula remains flexible allowing a wide variety of applications. Excellent for both floor and wall applications. Sets ceramic floor tile up to 16" x 16" (40.6 cm x 40.6 cm) and stone tile on floors up to 12" x 12" (30 cm x 30 cm). It can also be used in exterior wall applications in covered areas. Weighing 25% less than traditional adhesives, OmniGrip applies effortlessly and is easier to carry. Open and adjustment times are in excess of 60 minutes. Offers maximum resistance to prolonged water exposure as defined by ANSI A136.1, Type 1. Protected by MoldGard Technology to resist mould and mildew growth.
View Details
2057 946 mL Vinyl Composition Tile Flooring AdhesiveROBERTS 2057 946 mL Vinyl Composition Tile Flooring AdhesiveROBERTS 2057 VCT-EZ® Adhesive is a SBR latex adhesive that provides excellent grab and high residual tack. This superior grade adhesive brushes, rolls or trowels on and helps hold the tile firmly in place, even when subjected to repeated cleaning and mopping. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. When spread thinly as instructed, the adhesive dries correctly and turns clear, allowing chalk lines to remain visible. This adhesive is also suitable for installing vinyl-composition or vinyl-asphalt tile over existing vinyl-composition or vinyl-asphalt subfloors that are free from waxes, sealers and finishes. For interior use only, not recommended for installation of luxury vinyl tile (LVT), luxury vinyl plank (LVP) or solid vinyl-backed products.
ROBERTS
1000125506
CAD10.972026-09-29
The Home Depot Canada
4.0235255