Prime-Line Brass Lock and Door Reinforcement Plate for 1-3/8 In. Thick Doors, Brass Finish (Single Pack)

Defender Security U 9547 Brass Lock and Door Reinforcer assists in preventing forced entry by reinforcing the weak spot of an entry door. It can be used to reinforce and repair both metal and wood doors. Made of solid brass construction, the lock reinforcer plate comes finished in brass. All the necessary mounting hardware is included for a quick and easy installation. The lock reinforcement plate is pre-punched for mounting. The reinforcer is designed for 1-3/8 inch thick doors that have mortise or drive-in latches. It features one 2-1/8 inch bore with a 2-3/8 inch backset. The door reinforcer is non-recessed. Please refer to the line art drawing for dimensions and compare to your needs before purchasing (Not Universal).

Prime-Line Vintage Style Mortise Lock Assembly, 5-1/2 in. Face Plate, Brass Plated Steel

These mortise lock assemblies are constructed of steel and diecast components and come in a brass plated finish. This mortise caselock is designed for indoor use only, and it functions with the use of a spring-loaded square drive spindle at a maximum width and height of 1/4 in.. It ships handed (to close in a certain direction), but the latch can be reversed for opposite swinging doors. This mortise lock assembly is used with antique and vintage door hardware and it features a 2-3/8 in. backset. The latch includes a latch and deadbolt strike with fasteners, but it does NOT include any of the following components and they must be purchased separately: The door knobs, square spindle, spare keys and trim plates. Note #1: The square drive on this latch has a 9/32 in. opening, but it will ONLY accommodate 1/4 in. square spindles. Note #2: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware.

Prime-Line Stainless Steel Lock and Door Reinforcement Plate for 1-3/4 In. Thick Doors, Stainless Steel Finish (Single Pack)

Defender Security U 10539 Stainless Steel Lock and Door Reinforcer assists in preventing forced entry by reinforcing the weak spot of an entry door. It can be used to reinforce and repair both metal and wood doors. Made of stainless steel construction, the lock reinforcer plate comes finished in antique brass brass. All the necessary mounting hardware is included for a quick and easy installation. The lock reinforcement plate is pre-punched for mounting. The reinforcer is designed for 1-3/4 inch thick doors that have mortise or drive-in latches. It features two 2-1/8 inch bores that are 5-1/2 inch on center, with 2-3/8 inch backsets. The door reinforcer is non-recessed. Please refer to the line art drawing for dimensions and compare to your needs before purchasing (Not Universal).

Prime-Line Diecast Brass, Night Latch and Locking Cylinder

This is a satin nickel painted diecast locking unit and keeper, with hold open feature and spring latch for automatic locking. Features a 5-pin tumbler cylinder and requires a 1-1/4 in. bore. Uses a Kwikset keyway. For use on 1-3/8 in. to 2-3/8 in. thick doors, with a 2-9/32 in. backset.