Model # CSR2160BL|Store SKU # 1001520024
Provides elegant and practical use of space in a shower curtain enclosure. For installation: Hold rod up to desired position, one person at each end, to check height and location. Be sure that rod is level. With a pencil lightly trace the top and bottom of the wall plate. Set rod down. Remove retaining screws. Separate the wall plates from the rod. Leave swivel connectors on the rod. Place wall plates back on the wall at pencil marks. Mark screw holes at 12 and 6 o'clock positions. Set wall plate aside. Read anchor instructions carefully. Drill screw holes as marked. Install 4 anchors unless a hole is on a stud. Mount wall plates, Screw in to anchors. Place rod, with swivel connectors attached and set screw holes facing up into wall plates. Screw in retaining screws. Tighten. Adjust rod. Be sure that each end of rod is into the connector far enough to engage set screws and make solid contact. Tighten set screws with allen wrench.
This Zenna Home NeverRust Adjustable Shower Rod is an upgrade to any bathroom with its decorative finial end caps and durable, rustproof construction. The aluminum shower rod's adjustable design extends from 46 in. to 72 in. to fit any standard shower space with no cutting required. The rod's tension-mount technology allows secure installation with no tools, no drilling and no damage to walls.
The Zenna Home NeverRust Aluminum Adjustable Tension Mount Double Curved Shower Rod in Chrome helps rustproof your bathroom while also adding more elbow room in the shower. Made from lightweight but strong aluminum, these rods are guaranteed for life against rust. The rod's curve provides up to 9 inches of additional elbow room (when extended to 72 inches) in the shower. Use the second rod to allow for a separate shower curtain and protective liner, or hang towels or clothes on the outer rod. The rod installs in standard 60-inch or larger 72-inch spaces, but also fits in tubs or showers as small as 50 inches.
The Zenna Home NeverRust Aluminum Adjustable Tension Mount Double Curved Shower Rod in Satin Nickel helps rustproof your bathroom while also adding more elbow room in the shower. Made from lightweight but strong aluminum, these rods are guaranteed for life against rust. The rod's curve provides up to 9 inches of additional elbow room (when extended to 72 inches) in the shower. Use the second rod to allow for a separate shower curtain and protective liner, or hang towels or clothes on the outer rod. The rod installs in standard 60-inch or larger 72-inch spaces, but also fits in tubs or showers as small as 50 inches.
Add an elegant and luxurious look while also creating a more comfortable experience in the bath with Curved Shower Rods. Gracious and uncomplicated style features give Moen Curved Shower Rods an ageless yet fashion-forward presence. Tailored yet relaxed, Moen Curved Shower Rods are an exercise in design balance. This lustrous collection works seamlessly with today's lifestyles.
