RESISTO Repair and Seal Tape

RESISTO Hr Cap Sheet Membrane - Grey - 39 Inchx23 ft.

Prime the substrate with ELASTOCOL STICK or EXTERIOR PRIMER. Position the membrane parallel to the lower edge of the roof. Fold the sheet, to half of its width, or 50 cm over the whole length already positioned. It is recommended to kneel on the unfolded portion of the membrane to keep it in place during this operation. Remove the protective film from the folded section while placing the membrane on the support. The pressure-sensitive portion will then adhere to the support. Then take the other side of the membrane and repeat the previous two steps. Immediately apply pressure on the membrane using a heavy metal roller or hard rubber roller to ensure adhesion between the support and the membrane and avoid forming bulges, folds or gaps. Use non granulated side portion of the membrane to ensure a good overlap of about 10 cm from each edge. The overlap must be positioned on the upper side of the slope.

RESISTO Supreme Roof Repair

This product was specifically developed for professional roofers. With a higher concentration of high- quality bitumen, it seals roof elements, such as flashings, vents or upstands, and it repairs various joints, holes and cracks, built-up roofs, etc.

NaturaSet Barrier Seam Tape 4in x75ft

"NaturaSet's Barrier Seam tape is a 20mils thick flashing tape with anti-skid top film surface, made of acrylic adhesive ultra-bonding strength to seal around roof, windows, doors, and other joinery seams. It is suitable for all kinds of wet, hot and cold environments. The rough surface of the backing allows adhesion of spray or liquid sealants and weather-resistant coatings. The adhesive layer is covered with a disposable poly-coated Kraft paper release liner."

Henry All Season Rubberized Premium Roof Repair Sealant 3.78L

Formerly branded Black Knight, Henry All-Season Rubberized Roof Repair is a fast, year-round premium formulation for instant emergency repair of leaky roofs, peeled-back shingles, leaks around chimney flashings, dripping eavestroughs, and leaky skylights. The highly plasticized asphalt compound bonds to hot or cold surfaces, ranging from -12 °C to 50 °C, regardless of whether the surface is wet or dry. It will stay soft and pliable for many years, even in temperatures below freezing. This premium formulation contains a rust inhibitor to protect metal surfaces.