Hilti 1/2 inch x 3 inch HLC Hex Nut Sleeve Anchors (25-Pack)

Model # 336256|Store SKU # 1001676192

Overview

Model # 336256 Store SKU # 1001676192

Hilti's line of HLC Sleeve Anchors provide high performance load values in block, masonry, and concrete base materials. These sleeve Anchors are suitable for medium-duty fastening jobs, and the variety of head styles, lengths, and diameters allow you versatility for completing many different types of projects. The pre-assembled stud-type Anchors design makes your fastening project easier and quicker, as you can accomplish through-type fastenings even in bottomless holes. HLC Sleeve Anchors also feature a bulged middle section of the sleeve with triangular diamond shaped openings that help prevent the Anchors from twisting in its hole or dropping out of an overhead hole. Get the Anchors with more versatility and higher holding values: the Hilti HLC Sleeve Anchor.

Includes (25) 1/2 in. x 3 in. HLC hex nut head sleeve anchors

2-1/8 in. minimum drilling depth

1-1/2 in. minimum embedment depth

Carbon steel material with zinc plating

Manual

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Related Products

Paulin 1/4 x 1-1/2-inch Nail-In Anchors, Zinc - 100pcs

Paulin's Nail-In Anchors are two-part mechanical anchors for fastening into solid concrete, brick, cement block, or stone. Anchor hold is created by driving the nail into the anchor body, then each half of the expansion mechanism is compressed against the walls of the drilled hole. Zinc alloy coating provides moderate corrosion resistance.

View Details

Red Head 1/2-inch x 5-1/2-inch Hot-Dipped Galvanized Steel Indoor/Outdoor Wedge Anchors with Hex Nut and Washer - 10 Pack

Red Head Galvanized steel hex-nut-head concrete wedge anchors are ideal for attaching electrical equipment and other items to solid concrete. The anchors are galvanized to guard against rust. Fully threaded design accommodates fixtures of various thickness.

View Details

Toggler 1/2-in Drywall Plastic Toggle Anchors with Screws, 50pcs

Toggler® Plastic Toggle Anchors are designed for faster installation on light to medium loads. Use on drywall, sheet metal, tile and plaster. These anchors have a grip range from 3/8-in to 1/2-in thick.

View Details

Red Head 1/4-inch x 2-1/4-inch Steel Flat Head Threshold Sleeve Anchor with Zinc Plated Finish - 1 Pack

Red Head Sleeve Anchors are designed for fastening into porous concrete, hollow or grout-filled block and brick. Use to install machinery and supports, window frames, partitions, cabinets and pipe supports. Red Head Sleeve Anchors are contractor grade and building code approved.

View Details