Metaltech Climb-N-Go Motorized System for Metaltech Baker style Scaffold

Model # I-CNG|Store SKU # 1001803354

Overview

Model # I-CNG Store SKU # 1001803354

The Climb-N-Go was designed to increase worker efficiency, eliminating the need to get off the scaffold to move it. Equipped with a powerful electric motor, it is propelled by the energy of an 18 to 21 volts battery from one of the six largest brands in the industry. Its wheels are installed on the bottom of the scaffolding and the joystick control on the guardrail or directly on a rung. With the Climb-N-Go, you will be able to move around your work site at height in a safe way. In addition, it is compatible with all Metaltech Baker types scaffolding. Lighter and more compact than a scissor lift, the Climb-N-Go does not need a freight elevator to be moved around the job site.

The Climb-N-Go allows the scaffolding to be moved without having to descend to move it.

The electric motor can be installed on all Metaltech Baker type scaffolds.

Compact and easy to transport to a job site

4,500 feet of battery life on a single battery charge.

Automatic wheel lock safety system-Multidirectional joystick control positionableboth on a rung or on a guardrail

Complies with CSA S269.2-16 and OSHA standards 1926.452(W)

Manual

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches): 28.75
Assembled Height (in inches): 18.0
Assembled Weight (in lbs): 55.1
Assembled Width (in inches): 18.0
Packaged Depth (in inches): 29.75
Packaged Height (in inches): 12.5
Packaged Weight (In lbs): 66.9
Packaged Width (in inches): 14.25

Details

Material: Steel
Maximum Load (lbs.): 500
Number of Platforms Included: 0
Part Type: Wheels and Outriggers
Weight Capacity & ANSI Rating: Not Rated

Warranty / Certifications

Warranty is a 1 year Limited Warranty

Related Products

Metaltech Leveling Jacks for 6 ft. Scaffold

The MetalTech 12 in. Hollow Leveling Jacks (4-Pack) for Jobsite Series 6 ft. Baker Scaffold. These leveling jacks can be adjusted over 6 in. range. Each jack is supported by a heavy-duty, welded-on base plate for durability and features a super tough wing nut screw for easy adjustment.

View Details

Metaltech Safeclimb 6 ft. x 6 ft. x 2.5 ft. Baker Scaffold with 1,250 lb. Load Capacity

The MetalTech Safeclimb 6 ft. Baker scaffolding. Has an adjustable ANTI-SLIP Safeclimb deck that can be as low as 27-inch to as high as 76-inch to 2-inch Constructed with rugged 1-1/2-inch square steel tubes with a baked-on yellow poly powder coat finish with ANTI-SLIP Safeclimb ladder rungs. The unit has a load capacity of 1,250 lbs. spread evenly across the deck.

View Details

Metaltech 24 x 48 Ultra Jack System with connector, antislip base, net & scaffold stagings

The 24ft long x 48ft high Ultra Jack Kit offers an efficient and safe solution for elevated construction needs, allowing continuous work at heights with a quick setup.This kit includes all the components needed to set up a 24ft long x 48ft high installation.Kit components: four 24ft pro poles, two connectors allowing the poles to extend to a full 48 feet, two anti-slip bases for solid ground, two aluminum pump jacks, two workbenches, eight steel braces, one 20in wide x 24ft long staging platform, one 12in x 24ft long staging and a debris net.

View Details

Metaltech Sectional Guard Rail System for6 feet Baker Scaffold

The Metaltech Sectional Guard Rail System for 6 ft Baker Scaffold is essential for fall prevention and worker protection. Designed for interior scaffolding, it includes solid sectional, horizontal, and vertical steel bars, an integrated toe board to prevent falling objects, two doors allowing access to the platform and stabilizers to help reduce the guardrail movement. Its compact design allows for easy of storage, and transport. Mandatory when stacking two or three 6 ft baker scaffolds, it meets ANSI, CSA, and OSHA safety standards.

View Details