Multinautic 24 inch x 60 inch x 8 inch Hollow Dock Float

Model # 14007|Store SKU # 1001819371

Overview

Model # 14007 Store SKU # 1001819371

This Multinautic dock float is rotational molded with.15 in. thick walls. Top quality virgin polyethylene with ultraviolet inhibitors guaranty sturdiness and long lasting use. This premium float can be used as replacement with existing docks or the key element to a brand-new dock. Whether you install it on a wood dock or an aluminum or steel structure, the heavy-duty fabrication of this float will resist the saltwater, sun, oil and gaz spills

24 in. x 60 in. x 8 in. hollow dock float. Calculate 370 lbs. of buoyancy per float to evaluate your needs based on our how to build guide available for download on this web page

Floats are to be installed underneath the frame with bolts or lag bolts and large flat washers (not included) so both lumber and/or dock hardware stay out of the water

Required installation hardware (not included): on wood dock, 3/8 in. lag screws or hex bolts with 1.75 in. large flat washers (item 22162). On aluminum dock, we recommend item 22203

This float has a molded-in groove on its bottom to allow the installation of a board enabling the ease of sliding the dock on the ground. To be attached with 10in. rods in the center slots (not incl.)

Choose from 12 molded slots on the 1-3/4 in. extra-thick flange for dock mounting

Polyethylene is environmentally friendly and resistant to aquatic wildlife such as muskrats, otters and beavers and gazoline

Product Of Canada

Manual

HowTsoBuild--CommentConstruire-pdf-pdf.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Related Products

Dock Edge Dock Float, 400lb

These 400lbs dock float series is developed and produced by Dock Edge + making it possible to purchase a complete and compatible line fromhardware right through to the finishing touches. These floats arerotationally molded from the highest impact strength resin availablecontaining UV inhibitors and carbon black pigment to protect againstultraviolet deterioration. These resins offer a balance of toughness,rigidity, environmental stress crack resistance and low temperature impact performance. Rotationally molded floats can be used on existing docks to gain freeboard, eliminate twisting, and/or improve the levelness of the dock. They can also be utilized in new construction of timber or trussdock systems.

View Details

Howell Floating Dock Heavy Duty Pin for T-Connector

Floating Dock Hardware component manufactured from 5 Gauge (1/4") hot dip galvanized steel. Heavy Duty Pin for T-Connectors includes the hitch pin to ensure connector pin stays in position on the connector

View Details

Dock Edge Dock Float, 600lb

These 600lbs dock floats are rotomolded using a unique foaming process.The floats are foamed while being molded ensuring the foam bondswith the shell of the float creating a heavier impenetrable wall. This process give the dock float added wall strength and utilizesclosed cellular foam to ensure no water will be absorbed into the float. The foam application is recyclable and environmentally friendly. Idealfor commercial use.

View Details

Multinautic Dock Connector Hinge ''Big-T'' Male Side Only 5 x 5 x ¼ in. Hot dip Galvanised Steel 3-in. Pin

Heavy Duty Dock connector Male hinge for wood docks. T-style hinge. Made from ¼ in. thick Hot Dip Galvanised steel, this hinge is perfect to connect 2 stationary, semi-floating, or floating wood dock sections together. Measures 5 in. x 5 in. Requires 3/4 in. diametre pin no. 13313. Male tab measures ¾ in. They are the Dock Builders' choice for their great durability, quality design and ease of use. Fits with female side hinge no. 13306.

View Details