Henry 336 Bond Enhancer Self Stick Tiles 1 Gal.

Custom Building Products AcrylPro 1 Gal. Ceramic Tile Adhesive

AcrylPro Professional Ceramic Tile Adhesive is a professional formula adhesive with high bond strengths. Ideal for small format ceramic, mosaic, porcelain and most gauged stone tile on walls or floors, AcrylPro may be used in areas with intermittent water exposure such as tub surrounds and shower walls. Recommended for tile up to 8" (20 cm) on any side. Can be used with tile up to 15" (38 cm) on any side but dry time significantly increases. For tile with any side greater than 15" (38.1 cm), CUSTOM recommends using a polymer modified cement mortar specifically designed for setting large format tile.

ROBERTS 2057 15.14 L Vinyl Composition Tile Flooring Adhesive

ROBERTS 2057 VCT-EZ® Adhesive is a SBR latex adhesive that provides excellent grab and high residual tack. This superior grade adhesive brushes, rolls or trowels on and helps hold the tile firmly in place, even when subjected to repeated cleaning and mopping. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. When spread thinly as instructed, the adhesive dries correctly and turns clear, allowing chalk lines to remain visible. This adhesive is also suitable for installing vinyl-composition or vinyl-asphalt tile over existing vinyl-composition or vinyl-asphalt subfloors that are free from waxes, sealers and finishes. For interior use only, not recommended for installation of luxury vinyl tile (LVT), luxury vinyl plank (LVP) or solid vinyl-backed products.

ROBERTS 18.9 L (5 Gal.) Vinyl Composition Tile (VCT) Flooring Adhesive Asphalt Emulsion

ROBERTS 2038 is a solvent-free latex-based asphalt emulsion adhesive developed for the installation of vinyl composition tile (VCT) flooring. This is a black thin spread with superior holding power that resists tile shifting. It can be used over existing black out adhesive residue. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. This adhesive covers up to 17.6 sq. meters (190 sq. ft.) per gallon, depending on trowel type, substrate and installation conditions. It has 8-12 hours working time, approximately 45 minutes tack time, and a 24-hour cure time. It offers a 2-year shelf life from date of production when stored in original unopened container. Environmentally friendly, LEED compliant formulation; VOC < 2 g/L.

Henry 72 in. x 4.5 in. x 3.5 in. Waterproof Curb Underlayment for Showers

The 72 in. waterproof curb is the front edge of a shower that one typically steps over in order to enter a shower. This ready-to-install, waterproof curb is made of a lightweight foam, manufactured with a waterproof proprietary blend of synthetic polymer mortar and an alkali resistant fiber mesh. The waterproof curb is prefabricated so you only have to ensure the corners are sealed before you tile. Designed to integrate with the Everbilt shower system, the curb is loadbearing and heavy-duty, and can be tiled upon to create a completely waterproof design. If a longer curb is required, simply combine and join multiple pieces with Everbilt seam tape and waterproof wallpaper membrane. If a shorter curb is required, simply cut this curb down with a sharp razor blade knife..