Model # UJNCTBX1|Store SKU # 1001353426
Use for connecting 12-volt low voltage power wires to white LED tape strips or as a jumper cable when extending LED tape lighting to different areas. The 48 in. lead wire is perfect for connecting LED tape light that is to be installed as undercabinet lighting to a power supply that is situated on op of the cabinet.
Wire-to-Wire T Connectors from Armacost Lighting Connectors are the perfect solution for joining a main line wire to connection wires in a LED strip light installation. Allows for a cleaner installation; no need to run wires from light to light in a large project. Good alternative to wire nuts. Easy to use, wire doesn't have to be stripped before inserting into connector. The wire connectors work great with 2-conductor and can be configured for 4C and 5C connections. Great for large or custom undercabinet and accent LED lighting installations for residential, commercial, RV and boating.
This PF2002 recessed fixture accessory is utilized for plaster frames with hole openings of 3 7/8 inch and 4 1/2 inch It solidifies the installation for the fixture. Also recommended with soffit. It helps to seal the unit for energy savings.
Polycarbonate splicer with cover for connection between transformer extension wire (i.e. Romex) and low voltage cable or use as a splicer between 2 sections of low voltage cable. (maximum wattage allowed for 10/2 AWG: 300-Watt at 12-Volt, 500-Watt at 24-Volt maximum). UL and C-UL listed. The miniature wiring compartment can also be used as a junction box wiring hub for joining multiple luminaires and leading them back to your transformer. 25 Amp limit.
The BAZZ under cabinet Junction Box for direct wiring is compatible with all BAZZ Halogen products and BAZZ. NOTE : Junction box can't be enclosed or behind a wall where it is not accessible.
