• Cart
  • NOBODY BEATS OUR PRICES GUARANTEED.Terms & Conditions

    Bostitch Flooring Stapler Kit

    Model # MIIIFS|Store SKU # 1000107228

    Overview
    Specifications
    Reviews

    Overview

    Model # MIIIFS Store SKU # 1000107228

    The Bostitch Flooring Stapler Kit features an aluminum housing for jobsite durability and high speed pneumatic operation to increase productivity over manual tools. It precisely drives staples at proper angle and depth, and has an extra wide composite base plate for added stability. It also features a long reach handle for added comfort and control. Kit includes: Stapler, Graphite Mallet, Pre-Finished Flooring Adapter Foot, and 1/2 In. and 3/4 In. base plates for installation of hardwoods. Features driving power of 420 In. Lbs. and Fastener Range 1-1/2" to 2" 15-1/2GA staples. Magazine Capacity: 92 staples.

    1. High-speed, mallet actuated pneumatic operation increases productivity over manual methods
    1. Extra-wide composite base plate for added stability
    1. Long reach handle for improved comfort and control (short handle optional)
    1. Kit includes: Stapler, Graphite Mallet, Pre-Finished Flooring Adapter Foot
    1. 1/2" and 3/4" base plates included
    1. Solid and engineered hardwood flooring applications

    Specifications

    Dimensions

    Assembled Depth (in inches)
    3.78
    Assembled Height (in inches)
    28.97
    Assembled Weight (in lbs)
    17
    Assembled Width (in inches)
    18.69
    Packaged Depth (in inches)
    23.3
    Packaged Height (in inches)
    3.82
    Packaged Weight (In lbs)
    17
    Packaged Width (in inches)
    16.2

    Details

    Country of Origin
    US-United States
    Power Source
    Air

    Warranty / Certifications

    Bostitch warrants to the original purchaser the product is free from defects in material and workmanship and agrees to repair or replace any defective product 7 years from the date of purchase.
    Flooring Stapler KitPhoto of productThe Bostitch Flooring Stapler Kit features an aluminum housing for jobsite durability and high speed pneumatic operation to increase productivity over manual tools. It precisely drives staples at proper angle and depth, and has an extra wide composite base plate for added stability. It also features a long reach handle for added comfort and control. Kit includes: Stapler, Graphite Mallet, Pre-Finished Flooring Adapter Foot, and 1/2 In. and 3/4 In. base plates for installation of hardwoods. Features driving power of 420 In. Lbs. and Fastener Range 1-1/2" to 2" 15-1/2GA staples. Magazine Capacity: 92 staples.
    Bostitch
    1000107228
    CAD428
    The Home Depot Canada
    Flooring Stapler Kit is rated 4.5 out of 5 by 13.
    • y_2020, m_2, d_22, h_13
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_13
    • loc_en_CA, sid_1000107228, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 56ms
    • REVIEWS, PRODUCT
    Rated 2 out of 5 by from POOR IF USED ALOT IT WILL FAIL...I AM A PROFFESIONAL FLOORING INSTALLER NOT HAPPY WITH THIS PRODUCT AND THE WARRANTY
    Date published: 2019-12-10
    Rated 5 out of 5 by from floor nailer (from a business aspect) I have been using these guns for over 18 years. I run a flooring business we have tried many brands of guns but none have seemed to last as long or fire staples as powerful or fast as bostitch. As for people who say that they don't last long just don't rebuild them correctly. I used white lithium grease on my last 3 I rebuilt an we got well over 2 years out of them an that's using them on at least 2 installs a week. we run 2 crews so we pound out some footage. I would recommend these guns to anyone doesn't matter if your a d.i.y who wants to put in your own living room or a professional making a living doing flooring. Great Great gun.
    Date published: 2016-01-04
    Rated 3 out of 5 by from Gym floor installer... We have two totes full of these things, and have to bring them both whenever we install a new gym floor. Why? Quite a few leak, the magazine slides are finicky (after a few floors use), the o-rings don't typically last for more than 7000 square feet (elementary/auxiliary gym average size), and when they jam (which doesn't happen until the o-ring is compromised) it's not any easy task to take it apart to get to the staple. On another note, they're great flooring nailers, but maintenance wise, they just end up costing more in the end. If you do residential flooring or will install your own floor, this will be perfect for you. If you want a flooring nailer with zero issues down the road, check out Powernail. We have rarely had to send them in for maintenance. Which is a huge plus when you have to nail in more than 15,000 square feet in a week. So all in all, Bostitch makes good guns, but if you want a tank of a flooring nailer (not to mention an absolute delight to use), spend the extra on Powernail so you don't end up with a tote graveyard of flooring nailers.
    Date published: 2015-12-12
    Rated 5 out of 5 by from The only way to put down solid hardwood floor I did not buy this tool brand new but found it used from a local handyman who was not getting enough jobs. Although I felt bad that he wasn't getting enough business that he had to start selling his tools, I was glad we could help each other out. I do not know how much he used this tool before I bought it but frankly I do not think that matters, this tool is such a well built product it would take a lot of use before it breaks. I could see some internal parts eventually wearing down (o-rings, etc) but the instruction manual gives precise ordering and replacement instruction. I did notice that some of the hex head screws came loose after a lot of use, I should have just tightened them before each time I used the tool, that is just good maintenance for all air operated power tools. I used this tool to install 3/4" solid oak. I used the prefinished boot that came with the tool but was still even a little scared of marring the surface of my new floor. Just to be safe, I hot glued a Swiffer pad to the face, it worked perfectly. Not only did I never risk marring the finish of the floor, I cleaned up dust as I went. Plus, because the boot is very hard plastic, you can easily peel dried hot glue off of it and glue on a new Swiffer after a little use. I had considered renting this tool but just could not justify doing so. My install took me a couple weeks working on it after work and over the weekend; tool rental would have cost considerably more then this tool cost brand new. I have also found with tool rental you end up rushing the job since you are on the clock instead of taking your time to do a quality job. I can't see any other way to perform a quality install, so if you are not buying this tool as a professional, look into how much you think you could get reselling it before buying. There is probably a guy out there like me who would gladly pay near full price for this tool used. If i had one suggestion for this tool it is that it should come with a case. It comes with a lot of accessories out of the box, it would be nice for a case just for this tool to keep them all together. In general, I will buy a tool with a case over one without a case even for more money just to keep them organized and in better condition over the long haul.
    Date published: 2011-04-21
    Rated 5 out of 5 by from worth its weight in gold this nailer is bullet proof, give it all you have to throw at iit and it will do the job perfect every time.
    Date published: 2009-09-09
    Rated 5 out of 5 by from Worth The Money I have owned this stapler for several months now and it was well worth the purchase! I have put down 3/4 solid hickory floor in my house with no problem and for what I would have spent renting the nailer over and over again to use this with my schedule it was definitely worth the money. To me there really is no negative, this tool is easy to use, practically no maintenance and quick.
    Date published: 2009-04-20
    Rated 5 out of 5 by from great tool i use this stapler every day and put down up to 2000 square feet a week. its been going strong for 4 years now and has been great the whole time
    Date published: 2009-03-26
    Rated 5 out of 5 by from Fantastic Flooring Stapler I bought this stapler in December of 2006. I have already completed 5 jobs with this stapler. All that I can say is this is by far a phenomenal stapler. I believe the staples hold stronger then cleats, but I guess it just depends what you like. Hands down if you want a superior industrial stapler you have to pick this up.
    Date published: 2007-03-08
    • y_2020, m_2, d_22, h_13
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_13
    • loc_en_CA, sid_1000107228, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 28ms
    • REVIEWS, PRODUCT

    Can the Bostich Model: MIIIFS flooring stapler install 5/8" flooring

    Details show 1/2" and 3/4" base plates included. I am installing 5/8" Bamboo.
    Asked by: Anonymous
    Yes, you can install 5/8" flooring with this unit but you will require 2" staples. I hope this helps.
    Answered by: OnlineAssociate
    Date published: 2013-10-23
    • y_2020, m_2, d_22, h_13CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_1
    • loc_en_CA, sid_1000107228, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 90ms
    • QUESTIONS, PRODUCT