Model # 10-C346|Store SKU # 1000663556
In-Sure® Push-In Connectors help you safely, easily, and quickly connect solid and stranded wire. Simply push the conductors in the low insertion force makes it easy. In-Sure connectors are colour-coded with a clear shell that allows for visual verification of every connection.Their compact size and ergonomic design make them perfect for residential, light commercial, lighting retrofit, pre-fab wiring systems, plus any branch circuit wiring applications where a traditional twist-on wire connector would be used.
Easy to use - pull the lever up, insert a conductor and push the lever back down. Accomodates conductors from 0.14 to 4 sq MM (12-24 AWG). Conductors are gripped securely with 50+ lbs of pullout force, creating a reliable connection everytime, and ensuring wires do not budge when re-inserting into junction box. 2 test ports allow convenient testing of connections.
In-Sure® Push-In Connectors help you safely, easily, and quickly connect solid and stranded wire. Simply push the conductors in the low insertion force makes it easy. In-Sure connectors are colour-coded with a clear shell that allows for visual verification of every connection.Their compact size and ergonomic design make them perfect for residential, light commercial, lighting retrofit, pre-fab wiring systems, plus any branch circuit wiring applications where a traditional twist-on wire connector would be used.
CAT6 Feed-Thru connectors are single piece connectors that use the same assembly process, no special assembly or multiple pieces for CAT6. Open-end Feed-Thru connectors offer several advantages over standard closed end connectors. Conductor order can be verified prior to crimping. Conductors that Feed-Thru the connector are inserted far enough to be pierced by the pin below. The cable can be pushed or pulled into the connector to ensure that the twisted pairs are as close to the pin contacts as possible and that the jacket is seated beyond the primary strain relief for a secure connection. A patent pending design enables conductors to be cut flush with the end face of the connector when used with the FT-45 tool.
