Model # C30|Store SKU # 1000536888
Butt Splice Kit is used for waterproof installation or repair of #8 - #2 AWG copper cable. Easy to use polyolefin seals with heat gun or torch eliminating messy epoxies, tapes or mastics. Instructions: Slide heat shrink tubing over one conductor. Remove 5/8" insulation from conductors to be spliced. Insert stripped conductor in the butt splice. Tighten set screw to the lb per inch recommendations on the packaging and check for continuity of wire. Move heat shrink tube over splice and center. Heat tubing with torch or heat gun (MSTR-TORCH). Tubing shrinks at 350 F. Start in the middle of the tube, apply heat moving lengthwise back and forth over tubing. DO NOT TRAP AIR IN MIDDLE OF SPLICE KIT. When tubing has assumed the splice configuration and mastic seal is visible on each end of tubing, discontinue heating.
GB Xtreme heat shrink terminals offer triple protection against strain and vibration
This kit includes the tools necessary to tone and trace wires in common wiring systems. This premium tone generator has Angled Bed of Nails (ABN) clips that securely grip the cable. Tone Generator emits five distinct tones. An RJ11 plug easily connects to telephone or RJ45 data jacks for toning. The toner, also checks continuity and polarity that are indicated by clearly labeled LEDs. The probe traces with the tones signal. The adjustable-volume speaker amplifies the tone. The 3.5 mm jack allows for headphones (sold separately) to be attached in noisy environments. The probe has a tool-less non-metallic durable replaceable tip. The probe enables testing in distribution blocks without disturbing other services.
The M18 Force Logic 600 MCM Crimper is the Most Accurate Way to Crimp producing cULus classified crimps according to the UL 486A-B classification standards for #8 - 600 MCM Cu and #8-350 MCM Dual Rated and Anderson, Blackburn(R), Burndy, Ilsco, Panduit, Penn-Union and Thomas and Betts Connectors. Uses Milwaukee U Style Dies that feature vivid wire size markings, industry standard colour markings and imprint wire size onto the connector after crimp completion. Predictive Force Monitoring (PFM) actively measures pressure and automatically modifies performance levels of the system allowing the high speed hydraulic pump to power through the beginning of a cycle and land at precisely the right pressure, protecting internal components and; to complete the crimp. Milwaukee Crimpers feature a fully enclosed high speed hydraulic pump, POWERSTATE Brushless Motor, REDLINK Electronics and REDLITHIUM Batteries delivering Ultimate Reliability in the toughest conditions and up to 4x longer life.
Wiremold Flat Screen TV cord cover kit is the flat out easiest way to hide wall mounted flat screen TV wires and cables. The base and cover can be cut to fit then painted to blend seamlessly into any wall. And the Snap-on/snap-off cover feature makes adding additional wires a quick and easy.
