Halloween 🎃 Holiday Decor ❄ Appliances BBQs & Outdoor Cooking Electrical Bath Blinds & Window Coverings Building Materials Cleaning Decking, Fencing & Gates Décor & Furniture Doors & Windows Kitchen Floors & Area Rugs Heating & Cooling Hardware Lighting & Ceiling Fans Lumber & Composites Outdoor Living & Patio Outdoor Power Equipment Paint Plumbing Storage & Organization Sheds & Outdoor Structures Smart Home Snow & Ice Removal Tools All Departments Pro Savings Event Dewalt MAX Power Event Refresh For Less
Pro Savings event is on now. Don't wait!  Shop Event

Multinautic Heavy Duty Floating Dock Inside Corner Kit

Model # 19135|Store SKU # 1000683421

Multinautic Heavy Duty Floating Dock Inside Corner Kit

Overview

Model # 19135 Store SKU # 1000683421

This Heavy-Duty Floating Dock Inside Corner Kit is used to secure the corners of your dock together. It includes the matching components needed to build, repair or upgrade a dock system. It is used in the back of corner, pile guide, leg holder, or a connector hinge to reduce stress from bolts.

  1. 4 hot dipped Galvanized Steel Inside Corners (13305): 6-inch x 5-inch x 1/4-inch
  1. 4 hot dipped Galvanized Steel Back Plates (13300): 5-inch x 5-inch x 1/4-inch
  1. Kit has 9/16-inch holes, mounting: 1/2-inch x 3-inch carriage bolts (not included)
  1. For Floating Docks

Specifications

Connector Type

Floating Dock Kit

Duty Rating

Heavy

Material

Galvanized Steel

Dock Hardware Type

Hardware Kit

Product Size

5 in.

Dimensions

Assembled Depth (in inches)
0.01
Assembled Height (in inches)
0.01
Assembled Weight (in lbs)
0.01
Assembled Width (in inches)
0.01
Packaged Depth (in inches)
5.5
Packaged Height (in inches)
4.5
Packaged Weight (In lbs)
17.2
Packaged Width (in inches)
7.1

Details

Bracket Shape
Corner
Connector Type
Floating Dock Kit
Country of Origin
CN-China
Dock Hardware Type
Hardware Kit
Duty Rating
Heavy
Material
Galvanized Steel
Product Size
5 in.

Warranty / Certifications

Lifetime Limited Warranty. For further information, please consult our web site www.multinautic.com
Related Searches
martyr mercury kit cm 31640kit
playstar dock axle kit
multinautic flip up mooring kit
martyr mercury kit cm bravo23kita mer
playstar commercial grade hinge kit
7 inch x 3/16 inch dock
dock edge connector

Related Products

Multinautic Flip Up Mooring Kit

This Multinautic Mooring Kit includes two (2) 6 in. solid cast marine grade aluminum white Flip Up Cleats and four (4) marine grade, pre-spliced, double braided, 3/8 in. x 15 feet . white nylon Dock Lines. Designed to be low profile when not in use, your toes will be safe all summer! For boats up to 20 feet.

This Multinautic Mooring Kit includes two (2) 6 in. solid cast marine grade aluminum white Flip Up Cleats and four (4) marine grade, pre-spliced, double braided, 3/8 in. x 15 feet . white nylon Dock Lines. Designed to be low profile when not in use, your toes will be safe all summer! For boats up to 20 feet.
View Details

Playstar Dock Axle Kit

Makes dock installation and removal easy. For use with PlayStar Dock Wheels (sold separately) and available in multiple configurations.

Makes dock installation and removal easy. For use with PlayStar Dock Wheels (sold separately) and available in multiple configurations.
View Details

Multinautic Anchor Chain Hooks Kit 2-Pack with 1/2-inch T-Bolts for Aluminum Docks

An aluminum floating dock layout absolutely requires an anchoring system at the end of the dock and at every 30 ft. of the floating section. It is the concrete anchoring blocks that will keep the docks in place under wave movements. This essential kit will prevent the dock from moving up and down, and laterally. Anchoring chain retainers are required on both end corners of the dock and in the 4 corners of the floating dock section where the boats are usually moored. This kit is designed for the QPF-500 dock system, but this system can be bolted to the underside of other models if they can be drilled to accommodate the 1/2" bolts.

An aluminum floating dock layout absolutely requires an anchoring system at the end of the dock and at every 30 ft. of the floating section. It is the concrete anchoring blocks that will keep the docks in place under wave movements. This essential kit will prevent the dock from moving up and down, and laterally. Anchoring chain retainers are required on both end corners of the dock and in the 4 corners of the floating dock section where the boats are usually moored. This kit is designed for the QPF-500 dock system, but this system can be bolted to the underside of other models if they can be drilled to accommodate the 1/2" bolts.
View Details

Patriot Docks Floating Hinge Kit

The Floating Hinge Kit is used between stationary and floating dock sections to allow freedom of movement at the joint. The kit includes four hinge pieces, a pair of clamps, and one 4 ft. x 1-1/4 inch i.d. schedule 40 aluminum pipe.

The Floating Hinge Kit is used between stationary and floating dock sections to allow freedom of movement at the joint. The kit includes four hinge pieces, a pair of clamps, and one 4 ft. x 1-1/4 inch i.d. schedule 40 aluminum pipe.
View Details
Heavy Duty Floating Dock Inside Corner KitMultinautic Heavy Duty Floating Dock Inside Corner KitThis Heavy-Duty Floating Dock Inside Corner Kit is used to secure the corners of your dock together. It includes the matching components needed to build, repair or upgrade a dock system. It is used in the back of corner, pile guide, leg holder, or a connector hinge to reduce stress from bolts.
Multinautic
1000683421
CAD1512024-10-10
The Home Depot Canada
Heavy Duty Floating Dock Inside Corner Kit is rated 4.3 out of 5 by 17.
  • y_2024, m_10, d_9, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_10, tr_7
  • loc_en_CA, sid_1000683421, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 59ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Thick and solid These are very thick and solid parts. But you have to drill very straight if you want the backing plate to fit.
Date published: 2021-06-03
Rated 4 out of 5 by from Que 4 plaques intérieures Le seul point faible est qu'il n'y pas 8 plaques de renfort intérieures, seulement 1 plaque par coin.
Date published: 2019-07-11
Rated 4 out of 5 by from Dock hardware - inside corner Great heavy duty material. Just need to have extra backing plates as we are building a single dock.
Date published: 2021-04-06
Rated 5 out of 5 by from Bonne qualité Conforme à la description.
Date published: 2022-08-25
  • y_2024, m_10, d_9, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_10, tr_7
  • loc_en_CA, sid_1000683421, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 13ms
  • REVIEWS, PRODUCT

I see in the comments the company said that they would have provided the 4 extra backing plates required??  Does this come with 4 back plates or 8, because I can't understand how it would be functional with only 4??

Asked by: Mike
Hi, note that we are always there to answer your questions at 1-800-585-1237.
Answered by: Multinautic
Date published: 2022-06-06
  • y_2024, m_10, d_9, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_CA, sid_1000683421, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 62ms
  • QUESTIONS, PRODUCT