Skylink Motion Activated Light Kit

Heath Zenith 240 Degree Halogen Motion Sensing Security Light - Bronze

The SL-5512-BZ features 240 degree motion detection up to 100 feet. Tempered glass provides protection for the bulbs. Swivel arms allow directional lighting. Features DualBrite 2-level lighting. Uses (2) 150W halogen bulbs (Included).

Leviton Decora IllumaTech LED/Incandescent occupancy/motion detector

Leviton's IPS06 Occupancy Sensor combines state-of-the-art technology with new aesthetics to provide optimal management of lighting loads. These energy-saving sensors are engineered to control current LED and Incandescent/Halogen loads and ensure that lights will turn ON automatically and turn OFF automatically when motion is no longer detected within the covered range. Designed to fit in a standard wallbox, the device offers 180 Field of View and 900 sq. ft. of coverage. The IPS06 has screw terminals for easy installation and does not require a neutral wire for connection. The devices feature a time delay setting which allows users the option to delay the light load from switching off for 30 seconds, 5 minutes, 15 minutes or 30 minutes. For example, closet lighting would ideally be set to turn OFF 30 seconds after the space is vacated. The IPS06 is single pole or 3-way, and is compatible with screw-based LED, Incandescent and Halogen loads.

Leviton Decora Smart Wi-Fi Motion Sensing Dimmer Single Pole or 3-Way in White (2nd Gen)

Decora Smart Wi-Fi (2nd Gen) Motion Sensing Dimmer, 180 PIR field-of-view, up to 900 sq. ft. of motion coverage, supports both occupancy and vacancy modes of operation, single pole or 3-way when used with Wired Switch or Dimmer Companion or Wire-Free Anywhere Dimmer or Switch Companion. 300W LED/CFL, 450W Incandescent/Halogen, 450VA Magnetic Low Voltage, neutral wire required.

Leviton Decora IllumaTech universal occupancy/motion detector, (2-Pack)

Leviton's IPV02/IPS02 Universal Vacancy and Occupancy Sensors combine state-of-the-art technology with new aesthetics to provide optimal management of lighting and motor loads and a choice of either Manual-ON (Vacancy Sensor) or Automatic-ON (Occupancy Sensor) switching. These energy-saving sensors are engineered to control current LED, CFL, Electronic and Magnetic Low Voltage and incandescent loads and ensure that lights/motors will turn ON manually (vacancy) or automatically (occupancy) and turn OFF automatically when motion is no longer detected within the covered range. All models have screw terminals for easy installation and do not require a neutral wire for connection. The devices feature a time delay setting which allows users the option to delay the lights/motor load from switching off for 30 seconds, 5 minutes, 15 minutes or 30 minutes.