STZ Fitting Galvanized Iron Plug 3/8 inch

LDR fittings are ideal when selecting water pipe for your residence. Our durable, galvanized malleable iron fittings are 100% pressure tested directly at the factory. They are available in sizes for all residential water applications.

Sioux Chief 1/4 inch Lead-Free Brass MPT Square-Head Plug

Durable lead-free brass is an excellent choice,with all tapered pipe threads manufactured to highest quality standards and tolerances.Lead-free brass is not more than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes,pipe,plumbing fittings and fixtures.This pipe fitting is easy to use for both contractors and the do-it-yourselfer.

LESSO 3 In. ABS Male Plug MIPT

Fasten male and female pipes securely and with confidence.

WarmlyYours 12 Ft Pipe Heating Cable Kit Plug_In 120V

A burst water pipe in the dead of winter can be a huge inconvenience and completely replacing the insulation needed to prevent pipes in perimeter walls and crawlspaces from freezing can be cost-prohibitive. To keep your most vulnerable pipes from freezing, the simple and DIY-friendly solution is to install a PRO-Tect heating cable for pipes. This 120 V plug-in heating cable generates heat (7 watts per linear foot) which will keep your pipes from freezing in low temperatures. The integrated thermostat control, located between the non-heating lead cable and the heating wire itself, will ensure a consistent temperature while minimizing energy use. The thermostat turns the heating cable on when exposed to temperatures below 37.4°F (3°C). It will shut the heating cable off when the pipe has been heated to a temperature of approximately 50°F (10°C). The cable is covered by a 2-year warranty.