Utility Pumps(77 products)

This 3" Aluminum centrifugal trashpump has NPT threads and is capable of delivering 264 Gallons Per Minute at 37 psi. It comes with a 25mm powder coated steel frame and a 3.1L steel fuel tank on a GX200 Honda Engine. Capable of handling solids up to 1" diameter.

The BURCAM 300506S automatic submersible utility pump is ideal for general water transfer applications including draining basements, spas, pools, flat roofs, window wells and much more. This device monitors the water levels while pumping, so you can simultaneously do other things. Built of non-corrosive Noryl, the pump is lightweight and easy to carry. It has a water-cooled motor, garden hose discharge threads and comes with a barb adaptor for 3/4" flexible pipe. 9-ft grounded power cord. The electronic float starts the pump when the water level reaches 1.75 inches (+/- 0.5 inch). When the float reaches its shut off point, the motor continues to run for an additional 30 seconds to drain as much water as possible (down to 1/8 inch from the surface). With a capacity up to 740 US GPH and maximum head of 15 ft, the BURCAM 300506S is a must for every home.

The BURCAM 300523 submersible effluent pump is designed for use in residential applications either in a new installation or to replace an existing upright or submersible sump pump or effluent pump. The 1HP, 115V motor includes automatic thermal and overload protection. The vertical float switch ensures automatic operation of the pump and can be used in sump basins as small as 10-inch in diameter. The pump is equipped to handle 1/2 inch solids and includes a non-corrosive Noryl clog-free vortex impeller. The motor casing is made of stainless steel and the body is made of rugged cast iron. The maximum head is 25 feet and the capacity is up to 4400 US GPH.

The BURCAM 400700 submersible sewage grinder pump is designed for residential sewage applications to eliminate solids. The robust cast iron body provides strength and longevity. The oil-cooled, 3/4 HP, 115V, 60 Hz motor includes automatic thermal and overload protection. The vertical float switch ensures automatic operation of the pump. The pump includes new grinding technology to eliminate solids and a vortex impeller propels them out of the pump. This pump can be used in a new installation or to replace an existing sewage pump. The maximum head is 35 feet and the capacity is up to 1875 US GPH.