Multinautic Multi-Anchor Dock Leg Holder Kit

Model # 19111|Store SKU # 1000683420

Overview

Model # 19111 Store SKU # 1000683420

Engineered for strength, durability and simplicity, this Anchor Chain Leg Holder Kit included 2 Leg Holders and 2 Back Plates. These Leg Holders can accommodate up to 1 7/8 in. O.D. on a Stationary Dock or the beginning of Semi-Floating Dock . This Kit can be used as an Anchor Chain Holder (for Floating Docks) or a Pile Guide (for Floating or Semi-Floating Docks). You Dock will be stable, good looking and easier to install. Our hardware is designed for a 2 in. x 6 in. Dock Frame construction but can also be installed for a 2 in. x 8 in. Dock Frame construction. Instruction Guide included.

2 Hot Dipped Galvanized Steel Leg Holders (10011): 5-inch x 5-inch x 3/16-inch

2 Hot Dipped Galvanized Steel Back Plates (10010): 5-inch x 5-inch x 1/8-inch

Kit has 7/16-inch holes, mounting: 3/8-inch x 2 1/2-inch (sold separately)

Instruction plan included

Use as Anchor Chain Holder or Pile Guide

Leg holder or pile guide

Manual

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Duty Rating

Heavy

Material

Galvanized Steel

Dock Hardware Type

Hardware Kit

Product Size

1-7/8 in.

Dimensions

Assembled Depth (in inches): 0.01
Assembled Height (in inches): 0.01
Assembled Weight (in lbs): 0.01
Assembled Width (in inches): 0.01
Packaged Depth (in inches): 5.5
Packaged Height (in inches): 4.5
Packaged Weight (In lbs): 6.4
Packaged Width (in inches): 6.7

Details

Dock Hardware Type: Hardware Kit
Duty Rating: Heavy
Material: Galvanized Steel
Product Size: 1-7/8 in.

Warranty / Certifications

Lifetime Limited Warranty. For further information, please consult our web site www.multinautic.com

Related Products

Multinautic Dock Leg Holder Kit

This Multinautic Dock Leg Holder Kit holds 1-11/16po. Galvanized Steel Posts on a Stationary Dock with the reinforcement plates included that are fixed to the corners of series 10000 or having holes at 3.5 po.center in center. This Kit includes (2x) Leg Holders 10005: 5po.x 5po. x 1/8po. for 1-11/16po. Leg Pile and (4x) Back Plates 10003: 2-1/2po. x 5po. x 1/8po.. This Dock Kit comes with 7/16po. holes. The reinforcement plate is used to distribute the pressure on the wood.

View Details

Multinautic Flip Up Mooring Kit

This Multinautic Mooring Kit includes two (2) 6 in. solid cast marine grade aluminum white Flip Up Cleats and four (4) marine grade, pre-spliced, double braided, 3/8 in. x 15 feet . white nylon Dock Lines. Designed to be low profile when not in use, your toes will be safe all summer! For boats up to 20 feet.

View Details

Multinautic 8-inch Keel Roller Kit

The Keel Roller will protect boats or PWCs keel when boarding on a ramp or a trailer. Install on top edge of your dock to pull up a canoe or a kayak out of the water.

View Details

Multinautic Heavy Duty Floating Dock Inside Corner Kit

This Heavy-Duty Floating Dock Inside Corner Kit is used to secure the corners of your dock together. It includes the matching components needed to build, repair or upgrade a dock system. It is used in the back of corner, pile guide, leg holder, or a connector hinge to reduce stress from bolts.

View Details