Model # |Store SKU # 1001015175
Prime the substrate with ELASTOCOL STICK or EXTERIOR PRIMER. Position the membrane parallel to the lower edge of the roof. Fold the sheet, to half of its width, or 50 cm (20 in) over the whole length already positioned. It is recommended to kneel on the unfolded portion of the membrane to keep it in place during this operation. Remove the protective film from the folded section while placing the membrane on the support. The pressure-sensitive portion will then adhere to the support. Then take the other side of the membrane and repeat the previous two steps. Immediately apply pressure on the membrane using a heavy metal roller or hard rubber roller to ensure adhesion between the support and the membrane and avoid forming bulges, folds or gaps. Use non granulated side portion of the membrane to ensure a good overlap of about 10 cm (4 in) from each edge. The overlap must be positioned on the upper side of the slope.
Installation: 1. Prime the substrate with ELASTOCOL STICK or EXTERIOR PRIMER. 2. Position the membrane parallel to the lower edge of the roof. 3. Fold the sheet, to half of its width, or 50 cm (20 in) over the whole length already positioned. It is recommended to kneel on the unfolded portion of the membrane to keep it in place during this operation. 4. Remove the protective film from the folded section while placing the membrane on the support. The pressure-sensitive portion will then adhere to the support. 5. Then take the other side of the membrane and repeat the previous two steps. 6. Immediately apply pressure on the membrane using a heavy metal roller or hard rubber roller to ensure adhesion between the support and the membrane and avoid forming bulges, folds or gaps. 7. Use non granulated side portion of the membrane to ensure a good overlap of about 10 cm (4 in) from each edge. The overlap must be positioned on the upper side of the slope.
Protect & cover your outdoor space with SUNTUF corrugated roofing panels. Made of virtually unbreakable polycarbonate, these DIY roofing sheets are lightweight, block all UV rays, and can be installed quickly & easily with basic tools. Whether you're covering a patio, pergola, greenhouse, or deck, completing a storage shed for your gardening equipment, or building your own carport, SUNTUF will help you transform your space, making it livable for you and your family year-round, rain or shine!
Give your outdoor space the affordable upgrade it needs - meet white PALRUF corrugated panels. Lightweight and easy to install, these cost-effective, DIY PVC sheets can be used as patio covers, partitions, sliders, storage sheds, skirting, under decking, and more. Intended for open sides and well-ventilated structures, PALRUF performs reliably in regions with mild climates and are virtually maintenance-free. Much stronger than traditional fiberglass panels, PALRUF's fiberglass-free composition helps preserve color and surface condition for years.
Ondura's small pipe flashing accessory has a 12 in. x 12 in. flat center area plus corrugated edges that match the Ondura roofing. The center area accepts a wide range of pipe sizes. The small pipe flashing accessory is most common for cold pipes. This accessory base can be used with most any commercially available pipe boot.
