Model # CMK50|Store SKU # 1001352520
GB Xtreme heat shrink terminals offer triple protection against strain and vibration
Butt Splice Kit is used for waterproof repair of well pipe cables and splices of stranded cable #14 - #8 AWG. Connector set screws engage each wire for a secure splice. Assures safe and permanent connections. Easy to use polyolefin seals with heat gun or torch eliminating messy epoxies, tapes or mastics. Instructions: Slide heat shrink tubing over one conductor. Remove 5/8" insulation from conductors to be spliced. Insert stripped conductor in the butt splice. Tighten set screw to the lb per inch recommendations on the packaging and check for continuity of wire. Move heat shrink tube over splice and center. Heat tubing with torch or heat gun (MSTR-TORCH). Tubing shrinks at 350 F. Start in the middle of the tube, apply heat moving lengthwise back and forth over tubing. DO NOT TRAP AIR IN MIDDLE OF SPLICE KIT. When tubing has assumed the splice configuration and mastic seal is visible on each end of tubing, discontinue heating.
Butt Splice Kit is used for waterproof installation or repair of #8 - #2 AWG copper cable. Easy to use polyolefin seals with heat gun or torch eliminating messy epoxies, tapes or mastics. Instructions: Slide heat shrink tubing over one conductor. Remove 5/8" insulation from conductors to be spliced. Insert stripped conductor in the butt splice. Tighten set screw to the lb per inch recommendations on the packaging and check for continuity of wire. Move heat shrink tube over splice and center. Heat tubing with torch or heat gun (MSTR-TORCH). Tubing shrinks at 350 F. Start in the middle of the tube, apply heat moving lengthwise back and forth over tubing. DO NOT TRAP AIR IN MIDDLE OF SPLICE KIT. When tubing has assumed the splice configuration and mastic seal is visible on each end of tubing, discontinue heating.
Klein Tools Clamp Meter Kit includes the CL120 400A Auto-Ranging Digital Clamp Meter, RT210 GFCI Receptacle Tester and 69409 Line Splitter 10x. The kit allows for easy testing of live circuits and measuring of current and voltage. The kit includes a carrying pouch, test leads and batteries.
The mess and clutter of cords is no more with the Wiremold CordMate II cord cover kit. It is perfect for hiding small bundles of home entertainment cabling, speaker wires, TV/video cabling, and home office wiring. The kit comes 10 feet of channel and multiple fittings so you have everything you need to complete an average project in your home or office.
