Legrand Wiremold CordMate III Accessory Kit

GARDNER BENDER Butt Splice Kit 2-8 AWG; 1/Cd

Butt Splice Kit is used for waterproof installation or repair of #8 - #2 AWG copper cable. Easy to use polyolefin seals with heat gun or torch eliminating messy epoxies, tapes or mastics. Instructions: Slide heat shrink tubing over one conductor. Remove 5/8" insulation from conductors to be spliced. Insert stripped conductor in the butt splice. Tighten set screw to the lb per inch recommendations on the packaging and check for continuity of wire. Move heat shrink tube over splice and center. Heat tubing with torch or heat gun (MSTR-TORCH). Tubing shrinks at 350 F. Start in the middle of the tube, apply heat moving lengthwise back and forth over tubing. DO NOT TRAP AIR IN MIDDLE OF SPLICE KIT. When tubing has assumed the splice configuration and mastic seal is visible on each end of tubing, discontinue heating.

GARDNER BENDER Butt Splice Connector Kit 8-14 AWG; 1/Cd

Butt Splice Kit is used for waterproof repair of well pipe cables and splices of stranded cable #14 - #8 AWG. Connector set screws engage each wire for a secure splice. Assures safe and permanent connections. Easy to use polyolefin seals with heat gun or torch eliminating messy epoxies, tapes or mastics. Instructions: Slide heat shrink tubing over one conductor. Remove 5/8" insulation from conductors to be spliced. Insert stripped conductor in the butt splice. Tighten set screw to the lb per inch recommendations on the packaging and check for continuity of wire. Move heat shrink tube over splice and center. Heat tubing with torch or heat gun (MSTR-TORCH). Tubing shrinks at 350 F. Start in the middle of the tube, apply heat moving lengthwise back and forth over tubing. DO NOT TRAP AIR IN MIDDLE OF SPLICE KIT. When tubing has assumed the splice configuration and mastic seal is visible on each end of tubing, discontinue heating.

Klein Tools 2-Piece Wire Stripper and 11-in-1 Screwdriver Kit

This versatile 11-in-1 tool has everything the professional needs. The blades are interchangeable for quick and easy switch out. The Cushion-Grip handle allows for greater torque and comfort. This compact, lightweight wire-stripping and cutting tool is designed to cut 10 - 18 AWG solid wire. The precision-ground stripping holes cleanly cut wire and aid in easy removal of insulation. A narrow nose helps this tool fit easily into tight places.

Milwaukee Tool 25 ft. Low and Mid Flex Fiberglass Fish Stick Combo Kit with Accessories

The Milwaukee 25 ft. Fish Stick Combo Kit features the most durable connections and brightest glow. The knurled grip provides users with easy threading while a coating protects against splinters. Available in low, mid and high flexibility, each 5 ft. electrical fish stick is color-coded by flexibility providing users with easy identification. All Milwaukee fish sticks and fish stick accessories are compatible with 1 another. This kit includes four 5 ft. low flex fish sticks and one 5 ft. mid flex fish stick, a bullet nose tip and a hook tip.