Insert Nuts(5 products)

Paulin 1/8-inch Stud Pushnut Fastener Zinc Plated

Pushnuts or Palnuts are the ideal fasteners for securing parts and assemblies to studs, axles, shafts and threaded parts. Push-on type nuts have angular teeth that bite into shafts anywhere on their length and can be installed with finger pressure. This type of nut is often destroyed when removed.

Paulin 1/4-20 x 13 mm Connector Cross Dowel Zinc Plated

Connector Cross Dowels are used with Connector Bolts for making strong right angle joints in most manmade and natural woods. Cross Dowels are made of steel and are available in various diameters and lengths. Cross Dowels are manufactured with a slot or combination drive to enable orienting the dowel to the Connector Bolt in its blind hole.

Paulin 3/8-16-inch Nylon Insert Stop Nut - Pozi-Lok - Zinc Plated - Grade 5 - UNC

Nylon insert lock nuts have a nylon nylon material located at the top of the nut. The bolt threads into the nylon material which helps prevent loosening from vibration. These prevailing torque lock nuts offer excellent vibration resistance and positive locking under severe shock. The nylon collar prevents liquid seepage and internal corrosion. Compressive forces exert constant friction grip on the bolt and prevent loosening. Nuts may be reused. Steel is zinc plated for moderate protection against rust.

Paulin 1/4-20 EXTERIOR BLACK HEX NUT

Used for fastening to a bolt when mechanically joining materials together.