Nuts

Paulin 1/4-inch-20 Steel-Acorn (Cap) Hex Nut - Zinc Plated

Acorn Nuts are used to cover threaded fasteners that protrude and are, therefore, unsightly or a safety hazard.

Paulin 1/4-20-inch Finished Hex Nut-Grade 2-Oversized - Hot Dipped Galvanized - UNC

Hex Nuts are used for fastening to a hex head cap screw or bolt when mechanically joining materials together. Grade 2 is regular strength for everyday use. Made from low carbon steel. Use hot dipped galvanized finish or stainless steel where corrorsion is and rust is of concern or in exterior applications. Hot dipped galvanized finish provides one of the highest degree of corrosion resistance when compared to a steel zinc finish. Use grade 2 hex nuts with grade 2 hex head cap screws or hex bolts.

Paulin #10-24-inch Hex Machine Nut - 18.8 Stainless Steel - UNC - 8pcs

Machine Screw Nuts are small diameter hex nuts used with machine screws, threaded studs or rods. This type of nut is typically thinner than regular hex nuts and is used with smaller machine screw sizes under 1/4 inch. Use stainless steel where corrorsion is and rust is of concern or in exterior applications. Best for general hardware use or where high strength is not required.

Paulin 1/4-inch-20 Steel Hex Machine Screw Nut - Zinc Plated

Machine Screw Nuts are predominately small diameter hexagon nuts used with Machine Screws, threaded studs or rods.