Lock Nuts(32 products)

Paulin 8-32 Nylon Insert Stop Nut - Pozi-Lok - Zinc Plated - UNC

Used for fastening to a bolt when mechanically joining materials together. The bolt threads into the nylon material located at the top of the nut. This helps prevent loosening from vibration.

Paulin 1/4-20-inch Finished Hex Nut - Zinc Plated - Grade 2 - UNC

Hex Nuts are used for fastening to a hex head cap screw or bolt when mechanically joining materials together. Grade 2 is regular strength for everyday use. Made from low carbon steel. Steel is zinc plated for moderate protection against rust. Use grade 2 hex nuts with grade 2 hex head cap screws or hex bolts.

Paulin 1/4-20 x 20 mm Flanged Insert Nut Zinc Plated

Threaded inserts provide permanent machine screw threads in wood, plastic, soft metal or other porous materials. Threaded inserts are often used to replace worn wood screw or metal screw holes that have become oversized due to wear. Installed with a machine screw, bolt, hex key or screwdriver for those types available with a slotted head. Use flanged type inserts to prevent pull-through. Threaded Inserts prevent wood splitting and the need to use large screws in wood only applications.

Paulin #10-32-inch Nylon Insert Stop Nut - 18.8 Stainless Steel - UNF

Nylon insert lock nuts have a nylon nylon material located at the top of the nut. The bolt threads into the nylon material which helps prevent loosening from vibration. These prevailing torque lock nuts offer excellent vibration resistance and positive locking under severe shock. The nylon collar prevents liquid seepage. Compressive forces exert constant friction grip on the bolt and prevent loosening. Nuts may be reused. Use stainless steel where corrorsion is and rust is of concern or in exterior applications. Best for general hardware use or where high strength is not required