DIY Wine Rack

Lorem

This easy DIY project provides a space-saving wall rack for wine, with a rustic wood stain look that will elevate your kitchen or dining room wall!

Skill Level: Beginner
Time:
  1. Step 1 Gather Your Materials

    gather your materials

    Anything you don’t already have on hand can be found at your local Home Depot. If you need assistance finding anything, a store associate will be happy to help you.

  2. Step 2 Measure and Cut

    man measuring wood
    Man cutting wood

    Each of your 2x4 boards should be cut to a length of 13 inches. Cut a 45-degree mitre at the end of each 2x4. You’ll need 4 pieces cut like this. The backboard can be cut to 17-3/8 inches long.

  3. Step 3 Drill Bottle Holes

    Man drilling into wood

    On each of your short pieces, mark two-centred points 4-6/8 inches from the long ends of each 2x4. Drill holes for the bottlenecks at these points, using a 1-1/4 inch Forstner bit. Remember to protect your workspace with a piece of disposable wood underneath the board you’re drilling!

  4. Step 4 Assemble Rack

    Man gluing wood together

    Tape the end mitres together and glue the ends. Drill pilot holes, then attach these pieces with 2-1/2-inch screws.

  5. Step 5 Drill Backboard Hanger

    Man drilling into wood
    Man drilling into wood

    Measure along your backboard where the assembled rack will fit, marking points where it will attach via the keyhole hangers. Drill holes in the rack, and insert the screws where it will attach to the keyhole hangers.

  6. Step 6 Sand and Apply Stain

    Person staining a piece of wood

    Sand and apply the wood stain to both the rack and the backboard. Let it dry.

  7. Step 7 Finish Assembly

    person assembling wine rack

    When the stain is dry, use screws to attach the corner braces. Hang the rack on the backboard, and you’re done!

What You Need for This Project

Related Resources